Concrete contractors in Utah - free quotes

Utah keeps concrete contractors busy year-round. From driveways and patios along the Wasatch Front to foundation work in rapidly growing suburbs, concrete is one of the most in-demand home improvement services in the state. But Utah’s climate and soil conditions create challenges that demand experienced, knowledgeable contractors.

We connect Utah homeowners with concrete professionals who understand local conditions. Get free quotes and compare prices before you commit.

Utah licensing requirements

Utah requires contractors to hold an active license through the Utah Division of Occupational and Professional Licensing (DOPL). Concrete contractors typically operate under one of these license classifications:

• E100 General Engineering. Covers concrete flatwork, foundations, retaining walls, and other structural concrete projects.
• B100 General Building. Allows contractors to perform concrete work as part of broader construction projects.
• S210 Concrete. A specialty classification specifically for concrete work including driveways, patios, sidewalks, and flatwork.

To obtain a Utah contractor license, applicants must pass a trade exam and a business and law exam, provide proof of insurance, and post a surety bond. The bond amount varies by classification and protects homeowners against faulty workmanship.

Before hiring any contractor, verify their license status at the Utah DOPL website. Utah law requires licensed contractors to maintain a surety bond and carry general liability insurance. Confirm that your contractor has workers’ compensation coverage for their crew. Hiring an unlicensed contractor in Utah means you lose access to the state’s contractor recovery fund if something goes wrong.

Average concrete costs in Utah

Concrete costs along the Wasatch Front run close to national averages, with prices slightly lower in rural areas and slightly higher in the Salt Lake City metro during peak season.

For detailed pricing on specific projects, see our concrete driveway cost guide or patio installation guide.

Utah-specific cost factors

• Soil conditions. Much of the Wasatch Front sits on expansive clay soils that swell when wet and shrink when dry. Proper subbase preparation, including over-excavation and compacted gravel fill, is essential to prevent cracking and settling. This adds to project costs but protects the finished product.
• Freeze-thaw cycles. Utah winters bring repeated freezing and thawing that stress concrete surfaces. Contractors should use air-entrained concrete mixes and proper curing techniques to prevent spalling and surface damage. The Wasatch Front sees over 100 freeze-thaw cycles per year.
• Construction season. The busiest months for Utah concrete contractors are April through October. Scheduling during late winter or early spring may get you better pricing and faster scheduling.
• Altitude and UV. Utah’s elevation (4,200 to 5,000+ feet along the Wasatch Front) increases UV exposure, which degrades sealers faster. Plan on resealing stamped and decorative concrete every one to two years. Standard flatwork should be sealed every two to three years.

Soil and climate considerations

Utah’s geography creates distinct conditions for concrete work depending on your location.

Wasatch Front clay soils. The Salt Lake Valley, Utah Valley, and Davis County corridors sit on lake-bed sediments deposited by ancient Lake Bonneville. These clay-heavy soils expand up to 10% when saturated and shrink significantly during dry spells. This movement cracks foundations, heaves driveways, and damages patios that were not built on a properly prepared subbase.

Mountain communities. Higher elevations in Park City, Heber, and the Wasatch Back bring shorter construction seasons, harder freeze-thaw cycles, and rocky soil that can complicate excavation. Concrete work in these areas demands higher PSI mixes (4,500 to 5,000) and more aggressive air entrainment.

Southern Utah. St. George and the Dixie region have sandy, well-draining soils and milder winters, but summer temperatures above 100 degrees require hot-weather pouring techniques. Contractors in southern Utah typically pour early in the morning from June through September.

Seasonal considerations for concrete in Utah

Timing your concrete project matters in Utah. The state’s four distinct seasons each present different conditions.

Spring (April through June). The best time for most concrete projects. Daytime temperatures between 50 and 80 degrees produce ideal curing conditions. Spring rain is light along the Wasatch Front and usually manageable. Book early because contractors fill their spring schedules fast.

Summer (July through September). Hot days above 90 degrees can cause concrete to cure too quickly. Experienced contractors schedule pours for early morning, use curing compounds, and may add retarders to the mix. Late afternoon thunderstorms along the Wasatch Front can damage fresh pours.

Fall (September through October). A short but excellent window for concrete work. Mild temperatures and lower humidity create great curing conditions. Contractor availability improves as the rush season winds down.

Winter (November through March). Winter pours are possible but require heated blankets, insulated forms, and cold-weather concrete mixes. These measures add $2 to $4 per square foot. Most homeowners wait for spring unless the project is urgent.

Cities we serve

• Concrete contractors in Salt Lake City

More Utah cities coming soon. Get a free quote for your concrete project anywhere in Utah.

FAQ

Do concrete contractors need a license in Utah?

Yes. Utah requires concrete contractors to hold an active DOPL license under the E100 General Engineering, B100 General Building, or S210 Concrete classification. Licensed contractors must pass trade and business exams, maintain a surety bond, and carry insurance. Verify any contractor’s license through the Utah DOPL website before hiring.

What concrete mix works best in Utah’s climate?

Air-entrained concrete with a minimum compressive strength of 4,000 PSI is recommended for exterior flatwork in Utah. Air entrainment creates microscopic air bubbles that allow water to expand during freezing without damaging the concrete surface. Many experienced Wasatch Front contractors use 4,500 PSI for driveways that will be exposed to deicing products. Your contractor should specify the appropriate mix for your project and local conditions.

When is the best time to pour concrete in Utah?

Spring (April through June) and early fall (September through October) offer the best conditions for pouring concrete along the Wasatch Front. Temperatures between 50 and 80 degrees produce ideal curing results. Avoid summer pours during extreme heat (above 90 degrees) unless the contractor takes measures to prevent rapid moisture loss.

How do Utah’s clay soils affect concrete projects?

The Wasatch Front’s expansive clay soils are the single biggest threat to concrete longevity in Utah. Clay expands when it absorbs water and shrinks during dry periods, creating ground movement that cracks driveways, heaves patios, and damages foundations. Proper preparation includes excavating the clay to a depth of 6 to 8 inches, replacing it with compacted gravel fill, and ensuring good drainage away from the slab.

How much does it cost to replace a driveway in Utah?

A standard two-car driveway replacement in Utah (400 to 600 square feet) costs $2,800 to $10,200 including demolition and removal of the old surface. Stamped or decorative finishes push the cost higher. Read our driveway cost guide for a detailed breakdown by finish type and size.

Should I seal my concrete in Utah?

Yes. Sealing is essential along the Wasatch Front due to freeze-thaw cycles and occasional exposure to deicing products. Apply a penetrating sealer every two to three years for standard flatwork and every one to two years for stamped or decorative concrete. Wait at least 28 days after pouring before the first application.