Fence installation in Phoenix, AZ - free quotes from local pros

Phoenix homeowners have strong reasons to invest in quality fencing. Privacy from neighbors in tightly spaced subdivisions across Chandler, Gilbert, and Mesa. Security for pools, which are required by Arizona law to be enclosed by a barrier. A finished outdoor living space that handles the desert climate without constant maintenance.

The Valley’s extreme heat puts fence materials to the test. Block walls are the clear winner for longevity and low maintenance, which is why they dominate the Phoenix landscape. But wood, vinyl, wrought iron, and chain link all have their place depending on your needs and budget.

We connect Phoenix homeowners with local fence contractors who know Valley conditions and deliver solid work. The average Phoenix block wall project costs $4,500 to $12,000 for a standard yard. Get free quotes from local pros and compare before you hire.

Fence costs in Phoenix

Fence installation pricing in the Phoenix metro reflects the prevalence of block wall construction, which costs more than traditional fencing but lasts significantly longer. Here is what Valley homeowners can expect to pay.

What affects costs in Phoenix

Several factors specific to the Phoenix market influence your fence project cost:

• Caliche soil. The Valley’s caliche layer makes digging footings for block walls and post holes for fences significantly harder. Jackhammering through caliche adds labor time and cost. Properties in north Phoenix, Scottsdale, and the east Valley tend to have the thickest deposits.
• Block wall vs. traditional fence. Block walls cost roughly twice as much as wood or vinyl per linear foot, but they last two to three times longer with no maintenance. Most Phoenix subdivisions built since the 1980s default to block walls.
• Pool barrier requirements. Arizona law requires a barrier around all residential pools. Pool fences must be at least 5 feet tall with self-closing, self-latching gates and no horizontal rails that children can climb. Code-compliant pool fencing adds cost but is not optional.
• HOA requirements. Many Valley communities mandate specific fencing styles. Block walls with stucco finish matching the home exterior are the most common HOA requirement in Chandler, Gilbert, Peoria, and Scottsdale developments.
• Slope and terrain. Desert lots in north Phoenix, the Ahwatukee foothills, and parts of Mesa often have grade changes that require stepped wall construction or custom engineering.

How it works

Getting fence quotes in Phoenix is straightforward:

1. Describe your project. Tell us about your property, the type of fence you want, and your timeline.
2. Get matched with local pros. We connect you with up to three fence contractors in the Phoenix metro area.
3. Compare quotes and hire. Review estimates, ask questions, and choose the contractor that fits your budget and schedule.

There is no cost and no obligation. You are free to compare and decide on your own terms.

What to look for in a Phoenix fence contractor

Licensing

Arizona requires fence contractors to hold a CR-34 Fencing license through the Registrar of Contractors (ROC). Block wall construction may require a masonry classification (CR-28). Some contractors work under a B-1 General Residential Contracting license. Either way, verify the license is active before signing a contract.

The Arizona ROC website shows license status, complaint history, and any disciplinary actions. Check this information before hiring.

Insurance

Your contractor should carry general liability insurance and workers’ compensation coverage. Arizona’s ROC licensing requires a bond, and the ROC recovery fund provides additional homeowner protection. Ask for certificates of insurance and confirm they are current. This protects you if a worker is injured on your property or if the fence encroaches on a neighbor’s land.

Questions to ask

Before hiring a fence contractor in Phoenix, ask:

• Are you licensed with the Arizona ROC? What is your license number?
• Do you carry liability insurance and workers’ compensation?
• How many fence projects have you completed in the Phoenix area?
• Have you dealt with caliche on properties in this neighborhood?
• What footing depth and method do you use for block walls?
• Do you pull permits and schedule inspections?
• What warranty do you offer on labor and materials?
• Can you match the stucco finish to my home’s exterior?

Phoenix fencing considerations

Block walls in the Valley

Block walls (concrete masonry units, or CMU) are the standard in Phoenix for good reason. They handle 115-degree summers without warping, fading, or expanding. They provide complete privacy and significant noise reduction. And they require virtually no maintenance beyond occasional cleaning.

Standard Phoenix block wall construction includes:

• Continuous concrete footing. Typically 12 to 16 inches wide and 12 inches deep, reinforced with rebar.
• CMU blocks. Standard 8-inch blocks stacked to 6 feet, with rebar and grout-filled cores for structural strength.
• Stucco finish. A textured stucco coat applied to both sides, usually matched to the home’s exterior color.
• Cap blocks or decorative top. Finished with cap blocks, bullnose, or decorative stone for a clean top edge.

Heat and material selection

Phoenix’s extreme heat affects fence materials differently:

• Metal fences (wrought iron, aluminum, chain link) get extremely hot in direct sun. Surface temperatures can exceed 160 degrees, making them dangerous to touch and unsuitable for areas where children or pets play.
• Vinyl can warp, sag, or become brittle at sustained temperatures above 120 degrees. Standard vinyl fencing is not recommended for south-facing and west-facing exposures in Phoenix unless rated for extreme heat.
• Wood dries out rapidly in the desert climate. Cedar lasts longer than pine but still needs sealing every one to two years (more frequently than in humid climates). Wood fences on south-facing and west-facing sides of a property take the most punishment.
• Block walls are unaffected by heat. They stay cool relative to metal surfaces and maintain structural integrity indefinitely in the desert.

Pool barrier requirements

Arizona Revised Statutes require a barrier around all residential pools. If you are installing a fence that doubles as a pool barrier, it must meet these requirements:

• Minimum 5 feet tall (measured from the outside)
• No openings that allow passage of a 4-inch sphere
• No horizontal rails or elements that can be used as footholds for climbing
• Self-closing, self-latching gates with latches at least 54 inches above grade
• Gates must open away from the pool

Block walls naturally meet most of these requirements. If using iron or aluminum pool fencing, ensure it is specifically designed for pool code compliance.

HOA and permit rules

Many Phoenix-area HOAs have strict fencing requirements. Common restrictions include:

• Block walls with stucco finish only (no wood or chain link)
• Specific paint or stucco colors that match the community palette
• Maximum height of 6 feet for perimeter walls
• Decorative iron or aluminum for front and side yard visibility
• No barbed wire, razor wire, or electric fencing

The City of Phoenix requires building permits for block walls and fences over 6 feet. Many Valley cities (Scottsdale, Chandler, Gilbert, Mesa, Tempe, Glendale, Peoria) have similar requirements. Your contractor should handle the permit process and schedule required inspections.

Choosing a Phoenix fence material

The Valley’s extreme heat makes material selection more important than in other markets. Block walls remain the gold standard, but other options work in specific situations. For a comparison of wood and vinyl, see our vinyl vs wood fence guide. For budget fencing options, see our chain link fence guide. For detailed privacy fence pricing, see our privacy fence cost guide.

Fence permits in Phoenix

Phoenix requires building permits for block walls and fences over 6 feet tall. Many Valley cities (Scottsdale, Chandler, Gilbert, Mesa, Tempe, Glendale, Peoria) have similar requirements. For a complete overview, see our fence permit requirements guide. For tips on hiring the right contractor, read our guide to choosing a fence contractor.

Related services in Phoenix

Planning a bigger outdoor project? We also connect homeowners with contractors for:

• Concrete contractors in Phoenix
• Insulation contractors in Phoenix

A new block wall paired with a concrete patio creates the complete private backyard Phoenix homeowners love. Many Valley homeowners combine these projects during the cooler months to save on contractor mobilization costs.

Browse all fence contractors in Arizona or learn more about fencing options and costs.